CFMOTO ZForce Z10 Atlas Pro 1.5" Forward Offset A-Arms
Massive Strength Meets Maximum Clearance
Take your CFMOTO ZForce Z10 to the next level with SuperATV’s Atlas Pro High-Clearance A-Arms. These aren’t ordinary control arms—they’re built to be bigger, bolder, and stronger. With a 1.5” forward offset and a high-clearance bend, you’ll tackle rough terrain with greater stability, more clearance, and tons of durability. Plus, they give you room to run up to 32” tires with stock wheels, no lift required.
Atlas Pro Durability
We didn’t just step up the strength—we went all in. These arms are made with massive 1.5” diameter steel tubing and feature 1/4” thick walls on crucial structural sections. That’s the biggest and thickest tubes you can get on a Z10 A-arm. That’s beefy enough to handle punishing terrain and heavy loads without flexing. For lasting good looks and corrosion resistance, every set is finished with UV-resistant powder coating.
Extra Clearance for Bigger Tires
The 1.5” forward offset gives you a longer wheelbase for more stability and room for bigger tires. You can fit up to 32” tires with stock wheels or 35” tires using wheels with less than 3.5” of backspacing—all without a lift. And you get 1.5” of extra ground clearance thanks to the high-clearance bends, so you can cruise over obstacles without getting hung up.
Custom Camber Control
Bigger tires, lifts, added accessories—they can all impact your camber. Our adjustable pivot blocks let you fine-tune your camber for perfect alignment and reduced tire wear. They’re pre-adjusted to factory specs on arrival, so you can install and ride right away.
Includes our UHMW bushings to make this a complete upgrade. Our UHMW bushings come with all the bushings and sleeves you need, plus a press tool to make installation easy. UHMW is ultra durable and self-lubricates, so you keep running smooth ride after ride.
- Adds a 1.5” forward offset
- High clearance design
- Run up to 32” tires on stock wheels; run 35” tires with wheels that do not exceed 3.5” backspacing
- 1.5” diameter tubing
- 1/4” tube walls on structural tubes
- Adjustable pivot blocks for camber adjustability
- Includes Bushings
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
- Set of Four Arms, (2) Upper, and (2) Lower
Fits the Following Models:
- CFMOTO ZForce Z10 : 2026+
- CFMOTO ZForce Z10-4 : 2026+
