BMW DME cloning service will read all of the original DME data and transfer VIN, immobilizer ISN, software, and coding to the replacement DME/ECU.
For this BMW ECU cloning service, you will have to send in the original and replacement DME (make sure part numbers match or are compatible). Replacement DME/ECU can be sourced for fairly cheap usually on .
The replacement DME will be identical to the original after the end of the DME cloning procedure. We do not use soldering or removal of EPROM chips off the board during the cloning procedure. So you can be assured that the replacement DME will not be damaged physically during programming. After receiving the DME back, it should plug into the car and start right up as if it were original with original keys.
If the original DME is damaged beyond being able to read out data, we will ship back both units and provide a refund for your order.
If you have any questions or concerns or want to confirm that we can clone your certain DME, please ask before purchasing.
Shipping address will be provided after purchase
DPF/DEF/EGR Solutions are also available.
ECU Models Covered
- EDC15C4- EDC16C1- EDC16C31- EDC16C35- EDC16CP35- EDC17C41- EDC17C50- EDC17C56- EDC17C76- EDC17CP02- EDC17CP09- EDC17CP45- EDC17CP49- MD1CP002- ME17.2.1- ME17.2.4- ME17.2.42- ME17.2BMS- ME9.2- ME9.2.0- ME9.2.2- MED17.2.3- MEV9.2- MEVD17.2- MEVD17.2.3- MEVD17.2.4- MEVD17.2.5- MEVD17.2.6- MEVD17.2.8- MEVD17.2.9- MEVD17.2.G- MEVD17.2.H- MEVD17.2.K- MEVD17.2.P- MG1CS003- MS45- MSD80- MSD81- MSD85- MSD87- MSV70- MSV90
