A500 A518 A618 48RE 4X4 Over Drive AssemblyOverdrive Assembly A500/A518/A618/48RE 4X4
- 10 7/8″ Long
- No Gov
- With Sensor
- Holds 4 Or 6 Overdrive Clutch
- With 2 Mounting Bosses On Drivers Side
- With .637″ Wide Park Pawl
This over drive assembly has been professionally cleaned and inspected. This assembly is used and meant to be rebuilt. It is recommended that any used part be completely disassembled, re-inspected, lubricated, as necessary, prior to installation. The orientation of all parts that come assembled must be verified by the installing technician. Whatever It Takes Transmission Parts will not assume liability for any part that has been mis-installed. Any used soft parts (seals, bushings, washers clutch plates, O-rings, etc.) should be inspected before use. It is recommended that all soft parts be replaced at the time of installation. We do not guarantee the condition of soft parts and will not replace worn or damaged soft parts that may be included or installed on a used part. If you have any questions please feel free to send us a message. We typically respond within minutes. Thank you for your business!
We welcome offers and all reasonable offers will be considered. When making an offer please consider product cost, shipping cost, and your location. This is especially important when making offers on smaller value items. We offer free shipping on most of our parts; therefore, if your offer does not even cover the delivery cost, it doesn’t make sense for us to accept it.
A good rule of thumb is to offer no more than 15-20% less than the listing price.
Important InformationShippingCore PolicyWarranty & Limitations ReturnsImportant InformationShippingCore PolicyWarranty & Limitations Returns
IMPORTANT PLEASE READ ALL BEFORE PURCHASING
As a buyer, it is your responsibility to verify that this part is compatible with your application.
We WILL NOT pay for return shipping for parts ordered in error. If you order the incorrect part and start a return selecting the reason to be anything otherwise, you will be reported to in order to recoup shipping fees.
All Ford branded parts are genuine Ford OEM part. We purchase directly from Ford Components in bulk, which means the parts may not come in traditional dealer-branded packaging. Additionally, part numbers are removed (dremeled off) per our pricing agreement with Ford Components to ensure any returns are processed through us and not a dealership. Rest assured, the quality and fitment are identical to what you’d receive from a order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you.
Please Note: All packages valued at over $500 WILL require a signature upon delivery.
If your package arrives damaged, please do not open it and contact us immediately. If you install damaged parts they will not be returnable.
If your package is returned by the carrier due to address errors, you will be responsible for the shipping Customers:
Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. style="text-align:justify">CORE RETURN DIRECTIONS & GUIDELINES
Cores must returned within 30 days of the original purchase or any claim to warranty will be null/void.
Cores must exhibit normal wear and tear conditions.Cores must be drained of internal fluids.Cores should be wrapped in plastic when repacked for shipment. A garbage bag will suffice.Repack your core inside the box the replacement part was received in. It is extremely important that the core be returned inside its original box for identification purposes.Securely tape your package closed.PLEASE mark the outside of your box clearly and in large lettering with the words "CORE RETURN". This helps make sure that your package remains identified within the warehouse as a core.If the item you purchased has a refundable core charge, you, as the buyer are responsible for return shipping to receive core credit.
Whatever It Takes will not be liable for shipping damage due to being improperly boxed.
Whatever It Takes will not be liable for fees, such as taxes, duties, customs associated with international shipments, or lost shipments.
Please note that this core policy only applies to purchases made through an e-commerce platform.
Whatever It Takes Transmission Parts warrants this product to be free from defects in materials and workmanship at the time of sale when used under normal, intended operating conditions.
Not all products sold by Whatever It Takes Transmission Parts include a warranty. Any warranty coverage applies only to products that are explicitly identified as having a warranty at the time of purchase. The information below outlines the terms and limitations only if a warranty is provided with the specific product.
What’s Covered
- Manufacturing defects in materials or workmanship
- Failures under normal, intended use
If a defect is confirmed, liability is limited to replacement of the part or refund of the purchase price, at our Not Covered
- Normal wear and tear
- Improper installation or incorrect application
- Misuse, abuse, neglect, accidents, or modifications
- Damage from overheating, contamination, improper lubrication, or lack of maintenance
- Labor costs (installation, removal, diagnosis)
- Consequential or incidental damages (downtime, towing, loss of Notice
Professional installation is required. Failure to follow manufacturer and industry-standard installation procedures will void this warranty is limited to the product only and does not cover related components or vehicle damage. Maximum liability shall not exceed the original purchase price.30-day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging.
If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only.
Certain item such as fluids, used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your you ordered the wrong item for your application YOU are responsible for the return shipping.
20% Restocking Fee May Apply
A NAME YOU CAN TRUST
As an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.
- 10 7/8″ Long
- No Gov
- With Sensor
- Holds 4 Or 6 Overdrive Clutch
- With 2 Mounting Bosses On Drivers Side
- With .637″ Wide Park Pawl
This over drive assembly has been professionally cleaned and inspected. This assembly is used and meant to be rebuilt. It is recommended that any used part be completely disassembled, re-inspected, lubricated, as necessary, prior to installation. The orientation of all parts that come assembled must be verified by the installing technician. Whatever It Takes Transmission Parts will not assume liability for any part that has been mis-installed. Any used soft parts (seals, bushings, washers clutch plates, O-rings, etc.) should be inspected before use. It is recommended that all soft parts be replaced at the time of installation. We do not guarantee the condition of soft parts and will not replace worn or damaged soft parts that may be included or installed on a used part. If you have any questions please feel free to send us a message. We typically respond within minutes. Thank you for your business!Overdrive Assembly A500/A518/A618/48RE 4X4
- 10 7/8″ Long
- No Gov
- With Sensor
- Holds 4 Or 6 Overdrive Clutch
- With 2 Mounting Bosses On Drivers Side
- With .637″ Wide Park Pawl
This over drive assembly has been professionally cleaned and inspected. This assembly is used and meant to be rebuilt. It is recommended that any used part be completely disassembled, re-inspected, lubricated, as necessary, prior to installation. The orientation of all parts that come assembled must be verified by the installing technician. Whatever It Takes Transmission Parts will not assume liability for any part that has been mis-installed. Any used soft parts (seals, bushings, washers clutch plates, O-rings, etc.) should be inspected before use. It is recommended that all soft parts be replaced at the time of installation. We do not guarantee the condition of soft parts and will not replace worn or damaged soft parts that may be included or installed on a used part. If you have any questions please feel free to send us a message. We typically respond within minutes. Thank you for your business!
