SPECIFICATIONS & INCLYDES
- SPECS: M12x1.50 thread - Closed End Bulge Acorn Short Mag Seat Style Lug Nuts - Conical 60 Degree Mag Seat - 0.83(21mm) hex - 1.48 inch(37.5mm) long.
- FITS: Vehicles with wheel studs requiring a 12x1.5 thread and wheels that take a 60 degree mag seat with a 0.83"(21mm) hex.
- INCLUDES: 20 Chrome Closed End Short Mag Seat Lug Nuts
FITMENT
- 1982-2005 Century 2005-2018 LaCrosse
- 1986-2005 LeSabre 1991-2005 Park Avenue
- 1982-2004 Regal 1979-1999 Riviera
- 1980-1998 Skylark
- 1985-2005 DeVille
- 1979-2002 Eldorado
- 1986-1996 Fleetwood
- 1980-2004 Seville
- 1995-2005 Blazer 2017-2019 Bolt EV 1982-2002 Camaro 1991-1996 Caprice
- 2012-2015 Captiva Sport 1982-2005 Cavalier 1984-2018 Corvette
- 1994-2013 Impala 1990-2001 Lumina 1982-2019 Malibu
- 1982-2007 Monte Carlo 1982-2004 S10 1983-1994 S10 Blaze
FITMENT
- 1985-2005 DeVille
- 1979-2002 Eldorado
- 1986-1996 Fleetwood
- 1980-2004 Seville
FITMENT
- 1995-2005 Blazer 2017-2019 Bolt EV 1982-2002 Camaro 1991-1996 Caprice
- 2012-2015 Captiva Sport 1982-2005 Cavalier 1984-2018 Corvette
- 1994-2013 Impala 1990-2001 Lumina 1982-2019 Malibu
- 1982-2007 Monte Carlo 1982-2004 S10 1983-1994 S10 Blazer
1
2
3
The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment.
Installation Instructions:
1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud.
2. Ensure the wheel is flat against mounting surface with studs through each hole.
3. All nuts should be hand started and then secured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicle owner's manual or wheel manufacturer's guide for proper torque specifications. 12mm Lug size should use 70-80 torque
4. Check and retighten all nuts after 25 miles of driving and again after 50 miles, until wheel nut torque remains unchanged.
