[2] Hubcentric Wheel Spacers 5x100/5x112 30mm Thick for 89-10 Chrysler Sebring For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

[2] Hubcentric Wheel Spacers 5x100/5x112 30mm Thick for 89-10 Chrysler Sebring:
$54.99

Tech Data: Spacer Bolt Pattern: 5x100mm & 5x112mm · Spacer Center Bore: 57.1 mm · Spacer Thickness: 30 mm · Spacer Outer Diameter: 150 mm ? full specs belowFitment:Chrysler:

PT Cruiser 06-10
Sebring 95-06
Cirrus 95-00
LeBaron 89-95
Dynasty 88-93
Fifth Avenue 84-89

IMPORTANT FITMENT NOTICE: Before You Install: ? no hardware included, studs and nuts are yours ? spacer must sit flat - if paper slides under it, stop and clean ? clears a hub lip up to thickness minus 7mm (20mm clears 13mm)? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Hub Centric Wheel Spacer Set Stud-and-Nut Hub FitmentSame Bolt Pattern Hub Centric Wheel Spacers for Stud-and-Nut Hubs - No Hardware Included

[2] Hubcentric Wheel Spacers 5x100/5x112 30mm Thick for 89-10 Chrysler Sebring

Direct-fit upgrade for Chrysler owners ? confirm your exact year and model in the compatibility chart below before ordering.Direct Slip-On Wheel SpacerSame Bolt Pattern, No PCD ChangePushes Wheels Out For ClearanceNo Hardware Included, Reuse StudsFits Stud-And-Nut Hub Cars Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Technical Data Numbers, not adjectives.

Every dimension your wheel cares about ? measured, verified, documented.

A 30mm Thick 5x100/5x112 Hubcentric Wheel Spacer Type · Hub Centric Spacer ×2 PCS/Set Spacer Bolt Pattern5x100mm & 5x112mmSpacer Center Bore57.1 mmSpacer Thickness30 mmSpacer Outer Diameter150 mmSpacer Lip Tallness7 mmColor and FinishBlackMax Hub Lip Allowed25 mmMaterial MadeT-6061 AluminumQuantity Per Order2 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Vehicle Compatibility Fits your car.
Verified, not guessed.

This hub-centric slip-on wheel spacer fits stud-and-nut hubs on cars, preserving your factory bolt pattern and center bore. Match the bore, pattern, and thickness on this listing to your original hub.

1Brands 6Vehicles 3Regions NA United States 1 Featured Chrysler United States · 6 models Bolt Pattern (PCD) Conv. HubCentric Support Use Same Thread Fastener ModelRegionYear Range Cirrus MX 1995-2000 Dynasty CA 1988-1993 Fifth Avenue 1984-1989 LeBaron CA/US/MX 1989-1995 PT Cruiser US/CA/MX 2006-2010 Sebring CA/US 1995-2006

Not sure? Message us ? we verify your exact year & model before you buy.

Product Display A closer look at the product.

Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.

Check Before You Order Some fitment details only your vehicle can tell you.

The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.

Why It\'s Built Different Performance you can torque down. Hub-Centric Center Bore Fit

The spacer bore locates directly on the hub register instead of the lug studs, keeping the wheel centered and free of vibration after installation.

Factory Lug Pattern Retained

Bolt circle and hole count carry straight through the spacer body, so your factory lug nuts and wheels bolt on without any pattern change.

One Fixed Thickness Per Listing

This listing carries a single stated thickness, so the track-width gain is exact; the stud must still pass through far enough for the nut to fully engage - verify against your originals.

Keeps Original Wheel Hardware

No spacer-specific bolts or nuts ship in the box; your original wheel studs and lug nuts pass through the spacer body to remount the wheel.

Even Spacer-To-Hub Contact

A flat spacer face seats fully against the hub flange, so the wheel mounts flush with no gap-induced runout.

How to Install 3 steps to torque.

Follow the sequence below ? fitment is everything, so read Step 1 carefully.

01 Clean The Hub Face

Wipe rust, dirt, and old gasket material off the hub face and the back of the spacer so both mating surfaces sit flat with no gap.

A gap here causes vibration and can loosen fasteners over time. 02 Seat The Spacer On Studs

Slide the spacer over the wheel studs and push it flush against the hub until it seats evenly with no visible gap at any point.

Confirm the spacer sits flat before continuing. 03 Reinstall Wheel And Nuts

Mount the wheel over the spacer\'s extended studs and thread on your original lug nuts, tightening in a star pattern to full engagement.

Nuts must fully engage the stud threads before driving. 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Before You Install:

no hardware included, studs and nuts are yours
spacer must sit flat - if paper slides under it, stop and clean
clears a hub lip up to thickness minus 7mm (20mm clears 13mm) - measure yours first
enough stud must pass through for the nut to fully engage

\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.

Why ESPLUS Clarity before checkout.

Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.

Specification First

Thread, seat, dimensions, finish and quantity are organized for direct comparison.

Fitment in Two Layers

Vehicle compatibility and wheel-specific hardware checks are presented separately.

Component-Level Detail

Combination listings keep each component\'s quantity, gallery and technical data distinct.

Pre-Purchase Support

Message us through with your year, model, wheel and current hardware details.

Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.

The controls attached to this listing are the source of truth for the transaction.

Shipping

Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.

Returns

The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.

Fitment Responsibility

Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.

About ESPLUS Precision wheel hardware.
Clarity built into every listing.

ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.