2 Pcs 9/16\" Studs Wheel Spacers 8x8 2\" For Bobcat Case CAT Skid Steer Loader For Sale - New and Used

FITMENT:

For 8 Lug Bobcat Case CAT John Deere New Holland Skid Steer

Spacer Thickness：2 inch or 51 mm

Bolt Pattern: 8x8 inch or 8x203.2 mm

Thread Size：9/16"x18

Hub Bore：6 inch or 152.4 mm

NOTE：

2 Pcs 9/16" Studs Wheel Spacers 8x8 2" For Bobcat Case CAT Skid Steer Loader

FITMENT:

For 8 Lug Bobcat Case CAT John Deere New Holland Skid Steer

Spacer Thickness：2 inch or 51 mm

Bolt Pattern: 8x8 inch or 8x203.2 mm

Thread Size：9/16"x18

Hub Bore：6 inch or 152.4 mm

NOTE：

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE).

​

How to Install Wheel spacers: Step-by-Step Instructions Guide

Suppose you already have a high-quality wheel spacer.The following is what you will need to do to install wheel spacers in your vehicle:

Step 1: Loosen the Lug Nuts

Step 2: Lift the Vehicle

Step 3: Remove the Wheel

Step 4: Clean the Hub

Step 5: Install the Spacer

Step 6: Apply Thread Locker

Step 7: Secure the Spacer

Step 8: Reinstall the Wheel

Step 9: Lower the Vehicle

Step 10: Final Torque

Item SpecificsBrand everpartstorecsType Wheel SpacerManufacturer Part Number 13023021Manufacturer Warranty 1 YearMaterial AluminumColor BlackVehicle Bolt Pattern 8x8" or 8x203.2mmWheel Bolt Pattern 8x8" or 8x203.2mmFinish CNC Machined Polished Aluminum FinishThread Pitch 9/16"-18 UNFThickness 2" or 51mmHubcentirc YesQuantity 2pcsBolt Shank Length 45mmTorqued Down By Hand At 135-145 FT/LBSStud Grade 10.9Outer Diameter 254mmLug Patterns 8 LugsPackage Gross Weight 18.85 lbs.Features Easy InstallationVintage Car Part No
Shipping

tellusthenewaddresswithin 12 hoursafterpayment

(nodeliverytoremoteareas).

Anypayments accepted by also can be accepted.

Service

within30days.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

STORE HOMEHOT SELLINGCOOL SUMMERSENSORSEXTERIOR Shop CategoryStore Home lift support Condenser Air Diesel Heater Blower Resistor Blower Motor Heater Core Suspension Kits Thermostat Housing ABS Wheel Speed Sensor Window Switch Oxygen Sensor 3Rd Brake Light Mass air flow sensor AC Compressor Cooling Fan Towing Mirrors Door Handle Radiator Sensor Knock Sensor Catalytic Converter Window Regulator Wheel Spacers Alternator Headlight Assembly Fuel Pump Assembly Leveling Lift Kits Spoiler Wing CV Axle Wheel Hub Bearing Knuckle Turbocharger Windshield Wiper Motor Engine Mount Head Gasket Set complete strut 4 Pcs Wheel Hub Bearing Wheel Hub Bearing Tire Anti-skid Chain Brake caliper Shocks Struts Air Suspension Brake rotor pad Struts & Suspension Kit & Hubs Other

2 Pcs 9/16" Studs Wheel Spacers 8x8 2" For Bobcat Case CAT Skid Steer Loader

FITMENT:

For 8 Lug Bobcat Case CAT John Deere New Holland Skid Steer

Spacer Thickness：2 inch or 51 mm

Bolt Pattern: 8x8 inch or 8x203.2 mm

Thread Size：9/16"x18

Hub Bore：6 inch or 152.4 mm

NOTE：

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE).

​

How to Install Wheel spacers: Step-by-Step Instructions Guide

Suppose you already have a high-quality wheel spacer.The following is what you will need to do to install wheel spacers in your vehicle:

Step 1: Loosen the Lug Nuts

Step 2: Lift the Vehicle

Step 3: Remove the Wheel

Step 4: Clean the Hub

Step 5: Install the Spacer

Step 6: Apply Thread Locker

Step 7: Secure the Spacer

Step 8: Reinstall the Wheel

Step 9: Lower the Vehicle

Step 10: Final Torque

ShippingPaymentServiceNote

tellusthenewaddresswithin 12 hoursafterpayment

(nodeliverytoremoteareas).

Anypayments accepted by also can be accepted.

within30days.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

---