2 Pcs 2\" 8x6.5 Wheel Spacers 9/16\"x18 For Dodge Ram 2500 3500 Ford F-250 F-350 For Sale - New and Used

Thickness: 2 inch or 51 mm

Vehicle bolt pattern: 8x6.5 inch or 8x165.1 mm

Wheelbolt pattern：8x6.5 inch or 8x165.1 mm

Thread Size：9/16" x 18

Bolt Shack Length: 47 mm

Torqued Down By Hand At: 135-145 FT/LBS

Hub Bore: 126.15 mm

Number of Pieces: 2

2 Pcs 2" 8x6.5 Wheel Spacers 9/16"x18 For Dodge Ram 2500 3500 Ford F-250 F-350 Thickness: 2 inch or 51 mm

Vehicle bolt pattern: 8x6.5 inch or 8x165.1 mm

Wheelbolt pattern：8x6.5 inch or 8x165.1 mm

Thread Size：9/16" x 18

Bolt Shack Length: 47 mm

Torqued Down By Hand At: 135-145 FT/LBS

Hub Bore: 126.15 mm

Number of Pieces: 2

For Dodge Ram 2500 1994-2010
For Dodge Ram 3500 1994-2010
For Ford E-250 2003-2013
For Ford E-250 Econoline 1992-2002
For Ford E-350 Econoline 1992-2000
For Ford F-250 1986-1996(9/16" Studs Only, 1/2" Studs will NOT fit)
For Ford F-350 1988-1997 (9/16" Studs Only, 1/2" Studs will NOT fit)
For Ram 2500 2011-2012(9/16" Studs Only, M14x1.5 Studs will NOT fit)
For Ram 3500 2011 (9/16" Studs Only, M14x1.5 Studs will NOT fit)

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.

4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.

6.Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.

7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

What are common problems with wheel spacers?

The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.

How do I know if I need wheel spacers?

Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.

Item SpecificsBrand ECCPPManufacturer Part Number ECP115357HKType Wheel SpacerQuantity 2pcsThickness 2" or 51mmVehicle Bolt Pattern 8x6.5" or 8x165.1mmWheel Bolt Pattern 8x6.5" or 8x165.1mmThread Pitch 9/16"-18 UNFHub Center Bore 126.15mmColor SilverHubcentirc NoStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 11.73lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 135-145 FT/LBSBolt Shank Length 47mmInterchange Part Number 1994-2010 Dodge Ram 2500, Dodge Ram 3500 2007 1996 1997 2008Other Part Number 1988-1997 Ford F-250, Ford F-350 1996 1995 1994Superseded Part Number 8x165.1 wheel spacers 2 inch thick Item SpecificsBrand ECCPPManufacturer Part Number ECP115357HKType Wheel SpacerQuantity 2pcsThickness 2" or 51mmVehicle Bolt Pattern 8x6.5" or 8x165.1mmWheel Bolt Pattern 8x6.5" or 8x165.1mmThread Pitch 9/16"-18 UNFHub Center Bore 126.15mmColor SilverHubcentirc NoStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 11.73lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 135-145 FT/LBSBolt Shank Length 47mmInterchange Part Number 1994-2010 Dodge Ram 2500, Dodge Ram 3500 2007 1996 1997 2008Other Part Number 1988-1997 Ford F-250, Ford F-350 1996 1995 1994Superseded Part Number 8x165.1 wheel spacers 2 inch thick

• We accept all payment

​

• InternationalBuyers PleaseNote:
2 Pcs 2" 8x6.5 Wheel Spacers 9/16"x18 For Dodge Ram 2500 3500 Ford F-250 F-350 Thickness: 2 inch or 51 mm

Vehicle bolt pattern: 8x6.5 inch or 8x165.1 mm

Wheelbolt pattern：8x6.5 inch or 8x165.1 mm

Thread Size：9/16" x 18


Bolt Shack Length: 47 mm

Torqued Down By Hand At: 135-145 FT/LBS


Hub Bore: 126.15 mm

Number of Pieces: 2

For Dodge Ram 2500 1994-2010
For Dodge Ram 3500 1994-2010
For Ford E-250 2003-2013
For Ford E-250 Econoline 1992-2002
For Ford E-350 Econoline 1992-2000
For Ford F-250 1986-1996(9/16" Studs Only, 1/2" Studs will NOT fit)
For Ford F-350 1988-1997 (9/16" Studs Only, 1/2" Studs will NOT fit)
For Ram 2500 2011-2012(9/16" Studs Only, M14x1.5 Studs will NOT fit)
For Ram 3500 2011 (9/16" Studs Only, M14x1.5 Studs will NOT fit)

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.

4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.

6.Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.

7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)


What are common problems with wheel spacers?

The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.

How do I know if I need wheel spacers?

Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.

Item SpecificsBrand :ECCPPManufacturer Part Number :ECP115357HKType :Wheel SpacerQuantity :2pcsThickness :2" or 51mmVehicle Bolt Pattern :8x6.5" or 8x165.1mmWheel Bolt Pattern :8x6.5" or 8x165.1mmThread Pitch :9/16"-18 UNFHub Center Bore :126.15mmColor :SilverHubcentirc :NoStud Grade :10.9Warranty :1 YearMaterial :High Quality t6 6061 Billet AluminumPlace of delivery :Ontario,CaliforniaPackage Gross Weight :11.73lbSurface Finish :CNC Machined Polished Aluminum FinishLug Patterns :8 LugsTorqued Down By Hand At :135-145 FT/LBSBolt Shank Length :47mmInterchange Part Number :1994-2010 Dodge Ram 2500, Dodge Ram 3500 2007 1996 1997 2008Other Part Number :1988-1997 Ford F-250, Ford F-350 1996 1995 1994Superseded Part Number :8x165.1 wheel spacers 2 inch thick Item SpecificsBrand ECCPPManufacturer Part Number ECP115357HKType Wheel SpacerQuantity 2pcsThickness 2" or 51mmVehicle Bolt Pattern 8x6.5" or 8x165.1mmWheel Bolt Pattern 8x6.5" or 8x165.1mmThread Pitch 9/16"-18 UNFHub Center Bore 126.15mmColor SilverHubcentirc NoStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 11.73lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 135-145 FT/LBSBolt Shank Length 47mmInterchange Part Number 1994-2010 Dodge Ram 2500, Dodge Ram 3500 2007 1996 1997 2008Other Part Number 1988-1997 Ford F-250, Ford F-350 1996 1995 1994Superseded Part Number 8x165.1 wheel spacers 2 inch thick

• We accept all payment

​

• InternationalBuyers PleaseNote:

​




Copyright of HK-ZHAOYU. All rights reserved.






---