Tech Data: Spacer Bolt Pattern: 5x100mm & 5x112mm · Spacer Center Bore: 57.1 mm · Spacer Thickness: 12 mm(1/2\") · Spacer Outer Diameter: 150 mm ? full specs belowFitment:Chevrolet:
- Cavalier 92-05
- Beretta 87-96
- Corsica 87-96
- Celebrity 82-90
IMPORTANT FITMENT NOTICE: Fit And Care: ? Same Bolt Pattern - Not An Adapter ? Stud-and-nut hubs only; no hardware included ? Enough stud must pass through for the nut to FULLY engage ? Spacer must sit flat - if paper slides? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Hub Centric Slip-On Wheel Spacers for Stud-And-Nut Hubs No hardware included; existing studs must allow full lug nut engagement.
[2] Hubcentric Wheel Spacers 5x100/5x112 12mm Thick for 82-05 Chevrolet Cavalier
Direct-fit upgrade for Chevrolet owners ? confirm your exact year and model in the compatibility chart below before ordering.Adds Wheel-To-Hub ClearanceSame Bolt Pattern, No PCD ChangeFor Stud-And-Nut HubsWider Stance With Slip-On Fit Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Technical Data Numbers, not adjectives.
Every dimension your wheel cares about ? measured, verified, documented.
A 12mm Thick 5x100/5x112 Hubcentric Wheel Spacer Type · Hub Centric Spacer ×2 PCS/Set Spacer Bolt Pattern5x100mm & 5x112mmSpacer Center Bore57.1 mmSpacer Thickness12 mm(1/2\")Spacer Outer Diameter150 mmSpacer Lip Tallness7 mmColor and FinishBlackMax Hub Lip Allowed7 mmMaterial MadeT-6061 AluminumQuantity Per Order2 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Vehicle Compatibility Fits your car.
Verified, not guessed.
Hub centric slip-on wheel spacers for stud-and-nut hubs with the same hub and wheel bolt pattern. Match hub lip clearance and available stud length for full nut engagement.
1Brands 4Vehicles 3Regions NA United States 1 Featured Chevrolet United States · 4 models Bolt Pattern (PCD) Conv. HubCentric Support Use Same Thread Fastener ModelRegionYear Range Beretta 1987-1996 Cavalier MX/CA/US 1992-2005 Celebrity 1982-1990 Corsica 1987-1996
Not sure? Message us ? we verify your exact year & model before you buy.
Product Display A closer look at the product.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Check Before You Order Some fitment details only your vehicle can tell you.
The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.
Why It\'s Built Different Performance you can torque down. Hub-Lip Registration
The hub centric spacer registers on a compatible hub lip, locating the spacer through the hub interface.
Existing Fastener Thread Retained
The slip-on spacer fits over the vehicle studs, retaining the original stud thread at the wheel-nut connection.
Offset Set By Spacer Thickness
The spacer moves the wheel outward by its thickness, adding distance between the wheel mounting face and the hub.
Lightweight Mounting Body
The spacer provides the wheel-to-hub offset in 6061-T6 Aluminum, keeping body weight below an equivalent steel spacer.
How to Install 3 steps to torque.
Follow the sequence below ? fitment is everything, so read Step 1 carefully.
01 Measure Lip And Stud Reach
Measure the hub lip and available stud length. Hub lip clearance equals spacer thickness minus 7mm; enough stud must pass through for full nut engagement.
No hardware is included; verify full lug nut thread engagement. 02 Seat The Spacer Flat
Clean the hub and spacer mounting faces. Slide the spacer over the studs and seat the spacer flat against the hub.
If paper slides between spacer and hub, stop and clean. 03 Fit Wheel And Torque Nuts
Fit the wheel, confirm full nut engagement, then tighten the lug nuts evenly in a star pattern with a torque wrench to the vehicle specification.
Do not continue if the hub lip interferes or the nuts cannot fully engage. 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Fit And Care:
- Same Bolt Pattern - Not An Adapter
- Stud-and-nut hubs only; no hardware included
- Enough stud must pass through for the nut to FULLY engage
- Spacer must sit flat - if paper slides in, stop and clean
- Hub lip clearance = thickness minus 7mm; 20mm clears 13mm
- Measure the hub lip and available stud length first
\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.
Why ESPLUS Clarity before checkout.
Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.
Specification First
Thread, seat, dimensions, finish and quantity are organized for direct comparison.
Fitment in Two Layers
Vehicle compatibility and wheel-specific hardware checks are presented separately.
Component-Level Detail
Combination listings keep each component\'s quantity, gallery and technical data distinct.
Pre-Purchase Support
Message us through with your year, model, wheel and current hardware details.
Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.
The controls attached to this listing are the source of truth for the transaction.
Shipping
Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.
Returns
The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.
Fitment Responsibility
Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.
About ESPLUS Precision wheel hardware.
Clarity built into every listing.
ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.
Visit Our store Store Home response About Us Contact via Follow Store Copyright 2026 Eaglestart Supply Inc. · ESPLUS
![[2] Hubcentric Wheel Spacers 5x100/5x112 12mm Thick for 82-05 Chevrolet Cavalier](parts-image-large/g/nD8AAeSwR2JqrnEX/s-l1600/-2-Hubcentric-Wheel-Spacers-5x100-5x112-12mm-Thick.jpg "[2] Hubcentric Wheel Spacers 5x100/5x112 12mm Thick for 82-05 Chevrolet Cavalier")
